Saturday, December 11, 2010

Roller Derby Terminology

Here's a list of terms to help you keep track of what’s going on (pun intended).
The players
Blocker–a skater whose job is to stop (or block) the other team’s jammer from passing while also enabling her own team’s jammer to score. Typically, there are four blockers per team on the track, including the pivot. The remaining blocker positions are often referred to by number: two, three, and four, usually with the pivot at the front and the four at the back.
Jammer–the skater on the track who can score points. The jammer is identified by the star on her helmet. The jammer starts each jam behind the pack. After she has lapped the pack once (known as a non-scoring pass), she is eligible to score points for each subsequent skater hips she laps.
Lead jammer–the first jammer to emerge from the pack, without incurring a penalty, is designated by the referee as the lead jammer. She now has the advantage of being able to call off the jam if she wishes.
Pack–the mass of blockers, 4 from each team skating around the track together. Each jammer’s goal is to get through or around the pack.
Pivot–(also known as position 1) the blocker  who stays to the front of the pack and regulates pack speed. The pivot can be identified by the stripe on her helmet. The pivot has the ability to swap places with the jammer. Each team has one pivot.
The game
Bout–one game or match.  A bout lasts 60 minutes and is divided into two 30 minute periods.
Calling off the jam–the lead jammer can end a jam at any time by tapping her hands against her hips. This strategy can help prevent the other team’s jammer from scoring points if the lead jammer loses the advantage.
False start–a minor penalty that occurs when a player crosses the starting line before the whistle is blown–a blocker crosses the pivot line before the first jam whistle is blown, or a jammer crosses the jammer line before the second jam whistle is blown. This penalty can escalate to a major if the skater does not yield her advantage.
Four (4)–the blocker who plays the fourth position and usually stays at the back of the pack. This blocker is the first line of defense against the opposing jammer. Four can also refer to the accumulation of four minor penalties.
Jam–a two-minute period during which the action happens. The jam may last less than two minutes if the lead jammer call off the jam. There may be any number of jams in a bout.
Major–a penalty. "A foul that has a measurable physical force or effect which causes harm or adversely affects the game” (WFTDA). Examples include tripping or hitting a skater when she is down on the ground. One major will get a skater sent to the penalty box for one minute.
Minor–a penalty. "A foul that has a measurable physical force or effect but does not cause harm or adversely affect the game" (WFTDAExamples include skating out of bounds to avoid a block or elbowing an opponent but not causing her to lose her position. When a skater accumulates four minors, she is sent to the penalty box for one minute.
Nonscoring pass–the jammer‘s first pass through the pack. During this pass, the jammer is eligible to obtain lead jammer status, but she does not score any points.
Penalty–a rule-breaking offense observed and called by a referee.
Penalty box–when skaters accumulate four minor penalites or one major, they skate off the rink and spend one minute per infraction before returning to play. The penalty box has 3 seats for each team, one of which is designated for the jammer. Thus, the most players than can be in the box at once from any one team is two blockers and one jammer.
Referee–or ref, also known as a zebra. An enforcer of the rules. Referees are dressed in black and white stripes and have whistles so that they can start and end jams and draw attention to penalties. Jam refs keep track of jammers, while pack refs (some inside the track boundary and some outside) keep track of the pack.
Scoring pass–any pass through the pack after the jammer‘s first pass (the nonscoring pass). At this time the jammer racks up points for each opponent she passes.
Substitution–swapping players in between jams. Unlike other sports, no call needs to be made by a coach or ref; the skaters simply exchange places and leave/enter the track as needed.
Three (3)–the blocker who plays the third position on the track.
Two (2)–the blocker who plays the second position on the track. Often this blocker teams up with the pivot (1)  to control the front of the pack.
Wall–when two or more blockers skate side-by-side to create a multi-player block to contain another team’s player(s).
Other Terms
Assist–a motion administered by one player to help another player (usually the jammer) gain advantage. An assist includes pushing, pulling, redirecting, or whipping another skater.
Back block–a penalty that is incurred when a player makes contact with an opponent’s back, which is an illegal target zone.
Blocking zone–a part of the body with which it is permissible to hit another skater. Blocking must be done to a legal target zone. Legal blocking zones include the arms from the shoulder to above the elbow; the torso; the hips; the butt; and the mid- and upper thigh. Illegal blocking zones include elbows; forearms; hands; head; and any part of the leg below the mid-thigh.
C-block–a very powerful hit that is delivered by skating parallel to the target, then suddenly curving one’s skates (in an almost c-like path) toward the target, effectively connecting with the chest at the front of the target’s body.
Crossover–the motion of crossing one leg/skate in front of another, particularly when going around turns in the track. This movement enables agile skating and also helps a skater maintain her speed around the turns.
Cutting the track–a penalty wherein a skater goes out of bounds, passes an in-bounds skater, and re-enters the track in front of that skater. This is a minor penalty, but if a) the skater cuts multiple players, or b) the skater she cuts is the foremost member of the pack, then it is a major penalty.
Falling small–trying to keep your body as small as possible when hitting the ground to prevent other skaters from tripping over you. If you do not fall small, you may incur a major penalty by tripping another player.
Fishnet burn–a form of rink rash that occurs when a skater is wearing fishnets and the resulting burn has the distinct criss-cross pattern on the skin.
Fresh meat–new recruits.
Grand slam–when a jammer succeeds in lapping the opposing team’s jammer.
Hip check–a bump delivered using the hips while skating immediately next to the target.
Hip whip–a form of assist in which a player (usually the jammer) grabs her teammate’s hips to swing herself forward.
Hit–when a skater makes forceful contact with another skater.
Jammer line–a starting line on the track, located behind the pivot line, from which the jammers depart on the referee’s second whistle. Jammers may touch, but not cross, the line. If a jammer crosses the jammer line before the second whistle, it is designated a false start.
J-block–a powerful hit that employs an upward trajectory of the blocker’s body. The blocker stays low, and when she’s ready to hit, gets in front of her target, swoops her body low and then upward in a j-motion, and throws her shoulder into the target’s chest.
Lap–verb: to make one full pass through the pack; noun: one full pass through the pack. Note that this may take more than just one trip around the length of the track. Can also be used to describe the length of the track (e.g., from jammer line to jammer line).
Pads–protective gear required for skaters: wristguards, elbow pads, and knee pads. Skaters are additionally required to wear a helmet and mouthguard.
Panty–a stretchy helmet cover that is used to designate the jammer (with a star) or a pivot (with a stripe).
Passing the star–a strategic play in which the jammer removes her helmet cover (the star) and gives it to the pivot, enabling the pivot to become the new jammer and thus score points.
Penalty kill–when a team stalls or tries to slow down the action while waiting for a teammate (usually the jammer) to be released from the penalty box.
Pivot line–the starting line for the pack that is in front of the jammer line. Only the pivot is permitted to start on the pivot line; all other blockers must be lined up behind her hips. The pack may cross the pivot line once referee blows the first whistle to signal the start of the jam. If any skater crosses the line before the whistle, it is designated a false start.
Positional blocking–using the body to obstruct another skater’s path rather than forcefully hitting her.
Power jam–a situation where in one team’s jammer has been sent to the penalty box, and thus only the team with a jammer on the track can score.
Quads–skates with four wheels positioned two in front and two in back, contrasted with inline skates. Players cannot wear inline skates, only quads.
Recycling–when a set of two or more blockers rotate in a circular motion, sending one blocker after another to issue continuous hits to an opponent. This is also known as a waterfall.
Rink rash–a burn injury that occurs when flesh is dragged against a rink surface. Ouch!
Roller girl/doll–a female skater.
Snowplow–a technique for slowing down or stopping in which the stance is widened and the toes are turned inward to decrease momentum.
Star–the symbol on a helmet panty that indicates the jammer.
T-stop–a technique for slowing down or stopping in which one skate is dropped behind the other skate and turned perpendicularly, and the wheels of the back skate are dragged.
Taking a knee–if a skater is seriously injured on the track and the jam is called, it is common practice for skaters to drop to one knee while the injured skater is treated.
Target zone–an area of the body which may be hit. Legal target zones include hands, arms, chest, abdomen, sides, hips, and the front and sides of the legs to the mid-thigh. Illegal target zones include the head, neck, back, butt, back of the thighs, and any part of the leg below mid-thigh.
Three board–a slang term for a surface, usually a whiteboard, on which an nso writes the numbers of skaters who have accumulated three minor penalties, listed by team. This board is usually hoisted and visible to refs, skaters, and the bench.
Toe guard–a device, usually leather or plastic, designed to protect the toe of the skate boot from damage.
Toe stop–hardware for the skate that is plugged in to the plate beneath the toes. Often used for starts and stops.
Track–the oval-shaped surface demarcated by an inner and outer boundary wherein the action takes place.
Transition–the process of changing directions while skating from forwards to backwards or vice versa.
Tripping–a major penalty in which one skater makes contact with another skater–intentional or not–in the no-contact zone below the knee, causing that skater to lose her balance and fall.
Truck and trailer–when two teammates skate, one directly in front of the other, with the front (truck) pulling the back (trailer). Can be an effective method of getting a jammer through a pack.
Turn–a curve in the track. Usually these are referred to numerically. The first turn past the pivot line is turn 1, the second is turn 2, etc.
Turn stop–a stopping technique in which a skater reverses the direction she is skating (transitioning from forward to backwards) before stopping, usually by going up on her toe stops.
Twenty (20) feet–a referee call when a skater is out of the twenty-foot range of the pack and thus out of play. Blockers may not hit or assist and must immediately yield to opposing jammers upon reaching this point whether or not the call has been  made by the ref. If they do not, they may earn an out of play penalty.
Waterfall–when a set of two or more blockers rotate in a circular motion, sending one blocker after another to issue continuous hits to an opponent. This process is also known as recycling.
Wftdawomen’s flat track derby association. This is a regulatory body that organizes leagues and establishes rules and rankings. Mrd plays by wftda rules and aspires to become a wftda-certified league.
Whip–an assist technique wherein one skater uses another skater’s momentum to propel herself. For example, a jammer may grab a blocker’s arm, and the blocker will use her power and momentum to pull the jammer forward.


  1. Sadie, your blog is great! Very informative and I like how you share the link to the official webpage as well. The layout is very fitting for your topic and reflects the homepage well. Nice work!

  2. Sadie, Awesome start!!! The opening page is chalk full of information that has already elevated my understanding exponentially. The tie in to the website is perfect.

    I do hope you can add some video clips. Perhaps some short clips demonstrating some of the techniques and strategies described above.

    This will be a really fun blog to follow .... Congrats!!!

  3. Sadie, what a great blog and I really like how you are tying it in with the main website of the team. My head is spinning with the amount of derby lingo I just read! Video will be a great addition down the road.

  4. Rubber O Ring supplies, Rubber O Ring manufacturer, Pulling Roller supplies, Pulling Roller manufacturer, Pulling Roller supplies in Haryana, Pulling Roller manufacturer in Haryana
    Rubber products are referred to objects, items and devices made from rubber and used for industrial purposes. It is an indispensable product used in modern society industry and is as important as other products such as steel and wood.

  5. We would like introduce ourselves as Rubber & metal bonded rubber parts Manufacturer and Exporter Company. NEERAJ RUBBER INDUSTRIES. a progressive & professionally managed Industrial unit engaged in manufacturing of Rubber components since 1985 Established in 1985 for the past 27 years, we are certified an ISO 9001:2008. We have developed ourselves as leading manufacturer and exporter in all kinds of Rubber based products right from standard items & materials as per Clients samples & Requirements.

  6. Rubber O Ring supplies, Rubber O Ring manufacturer, Pulling Roller supplies, Pulling Roller manufacturer, Pulling Roller supplies in Haryana, Pulling Roller manufacturer in Haryana
    Rubber products are referred to objects, items and devices made from rubber and used for industrial purposes. It is an indispensable product used in modern society industry and is as important as other products such as steel and wood.